Automotive & Engineering Workshops
Hard-wearing, durable and easy to clean floors are required for a service bay.
Floor colour and safety are also form a vital role in the selection of your floor coating. The floor will have public access areas that will have to comply with the right degree of slip resistance as to meet required Health and Safety regulations.
High Performance Anti-Slip Floor Topping
OVERVIEW
This specification is for the application of the DEGADUR® Quartz Series flooring screed utilizing 420 and 526 resins. It is an industrial grade flooring screed designed for demanding environments subject to water, high foot traffic and mechanical loading. It is designed for use in Aquatic Centers, Accessible Showers & Toilets, Commercial Kitchens, Food Production Facilities and Sports & Leisure Facilities and offers an industry leading service life and excellent tolerance to oil, grease, and water. It is naturally anti-microbial, AsureQuality Certified and offers industry leading slip ratings and is tolerant to hot water cleaning.
PROPERTIES:
DEGADUR® ~ based on Liquid Plexiglas® resin technology is the perfect choice for projects requiring a rapid return to service.
- DEGADUR® Resin floors can be returned to full service in just 2 hours after the final coat of sealer is applied.
- DEGADUR® Resins are Solvent free, and free from chemicals listed in the Living Building Challenge Red List.
- The unique chemistry of DEGADUR® allows installation and cure in temperatures as low as minus (-) 30⁰c.
- The unique resin rich formula at 4.0~6.0mm finished thickness offers excellent impact and wear characteristics.
- Available in a range of 9 off the shelf, multi-coloured quartz finishes with slip resistance ratings up to 0.8 or R13.
High Performance Decorative Floor Topping
OVERVIEW
This specification is for the application of the DEGADUR® Dekor Series flooring system utilizing 420 & 527 resins. It is a commercial grade, high performance flooring screed designed for environments requiring a highly decorative but easy to maintain floor surface that is subject to high foot traffic and moderate mechanical loading. It is particularly suitable for Schools, Cafes, Restaurants, Public Toilets, Retail Spaces and Public Facilities due to the highly decorative aesthetics and strong resistance to wear and excellent hygiene characteristics.
PROPERTIES
DEGADUR® ~ based on Liquid Plexiglas® resin technology is the perfect choice for projects requiring a rapid return to service.
- DEGADUR® floors can be returned to full service in just 2 hours after the final coat of sealer coat is applied.
- The unique chemistry of DEGADUR® allows installation and full cure in temperatures as low as (-) minus 30⁰c.
- DEGADUR® Resins are Solvent Free and contain no listed chemicals on the Living Building Challenge RED LIST.
- The resin rich formula with a finished thickness of 2.5mm offers excellent resistance to impact and wear.
- DEGADUR® Dekor Series floors are an excellent alternative to sheet vinyl and can be used in wet areas.
- Available in a range of 10 off the shelf, multi-coloured flake finishes.
Transparent Matte Epoxy Coating for Sealing Concrete Substrates.
OVERVIEW
This specification is for the application of the Sto WL 150 transparent coating system applied over concrete substrates. WL 150 is suitable for use in automotive workshops, aircraft hangars, warehouses or similar that require a durable scuff resistant protective coating.
PROPERTIES
- Vapour permeable
- Very good adhesion to the substrate
- Good resistance to abrasion
- Low VOC emissions
CHARACTERISTICS:
Broadcast, coloured, rigid screed 1-3mm
SPECIFICATIONS:
- High abrasion resistance
- Waterproof
- Slip resistance
- Aesthetics
- German standard (OS-8)
SIKA SYSTEM / PERFORMANCE:
Primer: Sikafloor-156/-161 (optional)
Base coat: Sikafloor-264, a solvent free, coloured epoxy binder, broadcast with Quartz sand.
Seal coat: Sikafloor-264
Total layer thickness: 1-3mm
CHARACTERISTICS:
Broadcast, coloured, rigid screed 2-4mm
SPECIFICATIONS:
- High wear resistance
- Good chemical resistance
- Medium thermal shock resistance
- Slip resistance
- Coloured
SIKA SYSTEM / PERFORMANCE:
Sika System / Performance
Primer: Sikafloor-156
Base coat: Sikafloor-264 NS, a two part, total solid, coloured, epoxy binder for textured broadcast systems.
Broadcast with Quartz sand.
Seal coat: Sikafloor-264
Total layer thickness: 2-4mm
CHARACTERISTICS:
Decorative roll-on coating.
SPECIFICATIONS:
- Wear resistance
- Easy cleaning
- Decorative
SIKA SYSTEM / PERFORMANCE:
2 x Sikafloor-264, a two part, coloured, high build epoxy resin basedcoating.
Seal coat: Sikafloor-305, a water dispersed, coloured polyurethane based matt sealer.
Total layer thickness: 600-800 microns.
A 2-Part, economic, solvent-free coloured epoxy resin.
USES:
Roller coat for concrete and cement screeds with normal up to medium heavy wear e.g. storage an assemble halls, maintenance workshops, garages, loading ramps. Seal coat for broadcast systems, such as multi-story and undercover care parks, maintenance hangers and for wet process areas e.g. beverage and food industry, warehouse, vehicle showroom, dry areas, hangers and laboratories.
CHARACTERISTICS:
Good chemical and mechanical resistance, economical, solvent free, gloss finish and slip resistant surface possible.
SPECIFICATIONS:
- High wear and abrasion resistance
- Good impact resistance
- Good chemical resistance
- Medium thermal resistance
- Easy cleaning
- Coloured
SIKA SYSTEM / PERFORMANCE:
Primer: Sikafloor-156/ -161
Coating: Sikafloor-264, a two part, total solid, coloured, epoxy binder.
Total layer thickness: 600 – 800 microns
Is a thisotropice 2-component solvent free pigmented 100% solids high build epoxy coating for heavy duty and decorative finishes for walls and coves in addition to providing a textured floor coating.
USES:
Food processing industry, plastics industry, laboratories, aircraft hangers and workshops, washrooms, cloakrooms, chemical/pharmaceutical industries.
CHARACTERISTICS:
High mechanical properties, good abrasion resistance, high durability, coloured, joint less, easily cleaned and maintained, waterproof.
SPECIFICATIONS:
- High wear and abrasion resistance
- Good impact resistance
- Good chemical resistance
- Medium thermal resistance
- Easy cleaning
- Coloured
SIKA SYSTEM / PERFORMANCE:
Primer: Sikafloor-156/-161
Coating: Sikafloor-264 SL, a two part, coloured epoxy binder for self-smoothing screed systems.
Total layer thickness: 1-3mm
Is a thixotropic 2-component solvent free pigmented 100% solids high build epoxy coating for heavy duty and decorative finishes for walls and coves in addition to providing a textured floor coating.
USES:
Food processing industry, plastics industry, laboratories, aircraft hangers and workshops, washrooms, cloakrooms, chemical/pharmaceutical industries.
CHARACTERISTICS:
High mechanical properties, good abrasion resistance, high durability, coloured, joint less, easily cleaned and maintained.
Two part, water dispersed, solvent free, coloured, epoxy resin based coating.
USES:
Coloured epoxy coating for concrete, cement screeds, broadcast systems and epoxy mortars. Workshops, warehouses, garages, walk ways.
CHARACTERISTICS:
Good chemical and mechanical resistance, water vapour permeable, water dilutable, odourless and easy application.
- Medium wear resistance
- Surface stabilization
- Prevent concrete dusting
- Coloured
- Low odour
SIKA SYSTEM / PERFORMANCE:
Coating: 2 x Sikafloor-2540 W, a two part, water dispersed, coloured, epoxy resin based coating.
Total layer thickness: 150-250 microns
Is a clear two-component, water dispersed epoxy resin.
USES:
As a clear sealer for concrete floors that are subjected to light wear and abrasion. Workshops, warehouses, garages, walk ways, walls.
CHARACTERISTICS:
Reduces dusting, low odour, economical and reduces permeability.
SPECIFICATIONS:
- Prevent dusting
- Seal concrete surface
- Very low VOC
SIKA SYSTEM / PERFORMANCE:
Sikafloor Duroseal W, a 2-part, water based epoxy.
CHARACTERISTICS:
Clear surface harder for concrete.
SPECIFICATIONS:
- Economic surface hardening
- Good abrasion resistance
- Prevent surface dusting
- Curing to ASTM C-156
SIKA SYSTEM / PERFORMANCE:
1 – 2 x Sikafloor Curehard-24, a sodium silicate based liquid hardener sprayed and brushed into the substrate
OR
1 – 2 x Purigo 5S, a sodium silicate based liquid hardener sprayed and brushed into the substrate.
Is one component, non-yellowing, aliphatic, moisture curing, and polyurethane gloss coating containing UV light absorbers.
USES:
Ideal for interior and exterior seamless floors, concrete sealer and suitable as an aggregate glaze for embedding nonslip aggregates.
CHARACTERISTICS:
Flexible and heat resistant, one component moisture curing, clear, non-yellowing, high gloss and matt finish option, tough, hard wearing, Good chemical resistance and excellent abrasion resistance. Ideal for Warehouse, exposed concrete and vehicle showrooms.
CHARACTERISTICS:
Self-smoothing, temporary moisture barrier on “green” damp concrete.
SPECIFICATIONS:
- For concrete floors with damaged or missing DPC membrane
- No waiting time on “green” or damp concrete
- No blistering in the finish when coating damp concrete
SIKA SYSTEM / PERFORMANCE:
Primer: Sikafloor-155 WN
Base coat: Sikafloor-81 EpoCem, three part epoxy modified, cement based, self-smoothing screeds
Topping: Sikafloor resin system to suit
Total layer thickness: 2-3mm
SPECIFICATIONS:
- For surface damaged cementitious floors
- Reduced waiting time to overcoat green concrete
- No blisters on topping when coating damp concrete
SIKA SYSTEM / PERFORMANCE:
Primer: Sikafloor-155 WN
Screed: Sikafloor-81 EpoCem,
three component epoxy modified cementitious, self-smoothing screeds.
Topping: Sikafloor resin to suit
Total layer thickness: 2-3mm
