Washrooms & Hangers

CHARACTERISTICS:
Broadcast, coloured, rigid screed 2-4mm

SPECIFICATIONS:

• High wear resistance
• Good chemical resistance
• Medium thermal shock resistance
• Slip resistance
• Coloured

SIKA SYSTEM / PERFORMANCE:
Sika System / Performance
Primer: Sikafloor-156
Base coat: Sikafloor-264 NS, a two part, total solid, coloured, epoxy binder for textured broadcast systems.
Broadcast with Quartz sand.
Seal coat: Sikafloor-264
Total layer thickness: 2-4mm

CHARACTERISTICS:
Decorative roll-on coating.

SPECIFICATIONS:

• Wear resistance
• Easy cleaning
• Decorative

SIKA SYSTEM / PERFORMANCE:
2 x Sikafloor-264, a two part, coloured, high build epoxy resin based­coating.
Seal coat: Sikafloor-305, a water dispersed, coloured polyurethane based matt sealer.
Total layer thickness: 600-800 microns.

A 2-Part, economic, solvent-free coloured epoxy resin.

USES:
Roller coat for concrete and cement screeds with normal up to medium heavy wear e.g. storage an assemble halls, maintenance workshops, garages, loading ramps. Seal coat for broadcast systems, such as multi-story and undercover care parks, maintenance hangers and for wet process areas e.g. beverage and food industry, warehouse, vehicle showroom, dry areas, hangers and laboratories.

CHARACTERISTICS:
Good chemical and mechanical resistance, economical, solvent free, gloss finish and slip resistant surface possible.

SPECIFICATIONS:

• High wear and abrasion resistance
• Good impact resistance
• Good chemical resistance
• Medium thermal resistance
• Easy cleaning
• Coloured

SIKA SYSTEM / PERFORMANCE:
Primer: Sikafloor-156/ -161
Coating: Sikafloor-264, a two part, total solid, coloured, epoxy binder.
Total layer thickness: 600 – 800 microns

Is a thisotropice 2-component solvent free pigmented 100% solids high build epoxy coating for heavy duty and decorative finishes for walls and coves in addition to providing a textured floor coating.

USES:
Food processing industry, plastics industry, laboratories, aircraft hangers and workshops, washrooms, cloakrooms, chemical/pharmaceutical industries.

CHARACTERISTICS:
High mechanical properties, good abrasion resistance, high durability, coloured, joint less, easily cleaned and maintained, waterproof.

SPECIFICATIONS:

• High wear and abrasion resistance
• Good impact resistance
• Good chemical resistance
• Medium thermal resistance
• Easy cleaning
• Coloured

SIKA SYSTEM / PERFORMANCE:
Primer: Sikafloor-156/-161
Coating: Sikafloor-264 SL, a two part, coloured epoxy binder for self-smoothing screed systems.
Total layer thickness: 1-3mm

Two part, water dispersed, solvent free, coloured, epoxy resin based coating.

USES:
Coloured epoxy coating for concrete, cement screeds, broadcast systems and epoxy mortars. Workshops, warehouses, garages, walk ways.

CHARACTERISTICS:
Good chemical and mechanical resistance, water vapour permeable, water dilutable, odourless and easy application.

• Medium wear resistance
• Surface stabilization
• Prevent concrete dusting
• Coloured
• Low odour

SIKA SYSTEM / PERFORMANCE:
Coating: 2 x Sikafloor-2540 W, a two part, water dispersed, coloured, epoxy resin based coating.
Total layer thickness: 150-250 microns

Is a clear two-component, water dispersed epoxy resin.

USES:
As a clear sealer for concrete floors that are subjected to light wear and abrasion. Workshops, warehouses, garages, walk ways, walls.

CHARACTERISTICS:
Reduces dusting, low odour, economical and reduces permeability.

SPECIFICATIONS:

• Prevent dusting
• Seal concrete surface
• Very low VOC

SIKA SYSTEM / PERFORMANCE:
Sikafloor Duroseal W, a 2-part, water based epoxy.

CHARACTERISTICS:
Clear surface harder for concrete.

SPECIFICATIONS:

• Economic surface hardening
• Good abrasion resistance
• Prevent surface dusting
• Curing to ASTM C-156

SIKA SYSTEM / PERFORMANCE:
1 – 2 x Sikafloor Curehard-24, a sodium silicate based liquid hardener sprayed and brushed into the substrate
OR
1 – 2 x Purigo 5S, a sodium silicate based liquid hardener sprayed and brushed into the substrate.

Is a 2-pack total solid high build coating material based on epoxy resin.

USES:
For linings to storage tanks and silos, bund areas, wastewater tanks, geothermal cooling tower basins and reservoirs. Anti-corrosion coating in food processing plants, sewage works and farms and agricultural enterprises, chemical and pharmaceutical plants.

CHARACTERISTICS:
Solvent free, good chemical resistance, high build, impervious to liquids.

SPECIFICATIONS:

• High wear and abrasion resistance
• Good impact resistance
• Good chemical resistance
• Medium thermal resistance
• Easy cleaning
• Coloured
• Potable/drinkable water suitable

SIKA SYSTEM / PERFORMANCE:
Wearing course: Sikagard-62, a two part, high build, protective, epoxy coating for walls and floors.
Coating: Three coats, no primer necessary
Total layer thickness: 400-600 microns

Is one component, non-yellowing, aliphatic, moisture curing, and polyurethane gloss coating containing UV light absorbers.

USES:
Ideal for interior and exterior seamless floors, concrete sealer and suitable as an aggregate glaze for embedding nonslip aggregates.

CHARACTERISTICS:
Flexible and heat resistant, one component moisture curing, clear, non-yellowing, high gloss and matt finish option, tough, hard wearing, Good chemical resistance and excellent abrasion resistance. Ideal for Warehouse, exposed concrete and vehicle showrooms.